213-768-9330 Email info@laprimesigns.com
Quick Quote
Black Comet Ping Pong Pizza graphic printed on a white rigid panel.
Five people holding two small blue party signs at an event.
Two blue pizza-themed rigid signs displayed upright.
Blue Comet Ping Pong sign mounted on a brick interior wall.

Custom PVC Signs (Sintra Board)

Lightweight rigid panels for displays, menus, event graphics, and wall signs when paper is too flexible and metal is more than the job needs.

  • Lightweight panel — Easier to handle than metal for interior displays and temporary programs.
  • Printed face options — Plan one- or two-sided graphics around the way people approach the sign.
  • Production details approved early — Thickness, panel span, exposure, sidedness, and any exact hole pattern affect the build.
The story Rigid where it counts, light where it helps Material notes —

A display panel should stay put without making every move, event setup, or wall display feel like a construction project.

PVC foam board sits in that useful middle ground: more rigid than paper or poster stock, lighter than metal, and clean enough for menus, exhibits, temporary brand walls, and interior wayfinding.

The right production build starts with customer-verified final dimensions, viewing sides, placement, exposure, and approved mounting preparation. Large unsupported spans, direct sun, heat, wind, and repeated handling can change the appropriate thickness or push the project toward aluminum composite instead.

Quick answer

Direct answer: PVC foam board, often requested by the brand name Sintra, is a lightweight rigid substrate for printed graphics. It is a practical fit for indoor displays, event signs, menus, and protected short-term applications where a freestanding or wall-mounted panel needs to stay flat.

Key takeaways

  • Choose PVC when low weight and easy handling matter more than a metal edge or high-gloss acrylic finish.
  • Select thickness from the finished size, support spacing, mounting method, handling, and indoor or outdoor exposure.
  • For long-term exposed signs, wide unsupported panels, or demanding coastal conditions, compare PVC with aluminum or ACM before ordering.

Specs & options

Specs

Material
PVC foam board; the written quote identifies the exact product and whether a requested brand is available
Common thickness range
1/8", 1/4", or 1/2" where available; final choice depends on size and support
Graphics
Single- or double-sided layouts, subject to the selected panel and finish
Best fit
Interior signage, events, displays, and protected or short-term exterior applications

Options

  • Custom dimensions and layouts for logos, menus, promotions, exhibits, or wayfinding.
  • Single-sided or double-sided graphics based on the viewing plan.
  • Rounded corners or drilled mounting holes when exact dimensions are supplied and approved.
  • Protective handoff packaging appropriate to the approved panel order.

Need help preparing files? See Artwork Setup.

Good fit for

  • Counter menus, retail promotions, pop-ups, and protected entry displays.
  • Trade-show graphics, presentation boards, exhibits, and temporary brand walls.
  • Interior room identification, event directions, and informational panels.
  • Short-term exterior messages where wind, sun, support, and attachment have been reviewed.

How it works

  1. 1) Share final specs

    Send customer-verified finished size, quantity, viewing sides, indoor or outdoor placement, and any installer-approved hole diagram.

  2. 2) Provide artwork

    Upload vector artwork when possible, or a high-resolution file built at final size with fonts and linked images supplied.

  3. 3) Approve the proof

    Confirm layout, trim, panel thickness, edge treatment, and any mounting-hole locations before production.

  4. 4) Produce + prepare handoff

    The approved panels are printed, cut, drilled when specified, inspected, and protected for customer or third-party-installer handoff.

FAQ

What are PVC signs, and what is Sintra board?

PVC sign boards are rigid foam-plastic panels. Sintra is a widely used brand name for this material category. For an accurate quote, clarify whether the project requires that brand or whether a comparable PVC foam board is acceptable.

Are PVC signs good for outdoor use?

PVC can suit protected or short-term exterior applications, but direct UV, heat, wind, panel span, and attachment all matter. A long-term exposed sign may be better specified in aluminum or aluminum composite material.

What thickness should I choose?

Thickness depends on finished dimensions, support spacing, mounting, exposure, and how often the sign will be moved. Share those details rather than choosing thickness from size alone.

What’s the difference between PVC and acrylic signs?

PVC is opaque, lightweight, and practical for printed panels. Acrylic is typically heavier and chosen for a polished or dimensional appearance, but it has different edge, mounting, and scratch considerations.

Can PVC panels be drilled?

Drilled holes can be included when the customer or installer supplies and approves the exact diameter and center locations. Hardware or adhesive is not included unless listed in the written quote, and the customer or installer remains responsible for mounting design and site suitability.

Do PVC signs require permits?

Requirements depend on the sign type, size, placement, property rules, and local jurisdiction. The customer or qualified installer confirms property and municipal requirements before approving production; LA Prime Signs does not research or obtain permits.

What arrives with a PVC sign order?

The finished order contains the approved PVC panels with the quoted print, cut, thickness, sidedness, and selected drilling, protected for handoff. Field measurements, site surveys, mounting design, structural or electrical decisions, permits, code compliance, access, and installation are not included.

Production parent

See commercial printing for rigid-panel artwork, proofing, printing, cutting, and production handoff.