Feather Flag Banners

Tall fabric flags produced from approved artwork and supplied with only the compatible pole, base, and carry components identified in the quote.

Indoor or outdoor configurations reviewed from the customer-verified surface, exposure, clearance, and intended use.
Dye-sublimated fabric graphics designed to move with the breeze and read from passing sightlines.
Single- or two-sided construction based on the direction from which the message needs to be seen.
Portable pole and base components that can be broken down between displays.

The story A Moving Sign With One Job: Get Seen Placement + exposure notes —

A feather flag has very little time to communicate. Someone may see it from a moving car, across a parking lot, or between people at an event, so one strong phrase usually beats a stack of details. A website, date, or offer only belongs if it stays readable at the real viewing distance.

Placement matters as much as print. Sun, moisture, wind, irrigation, and crowded pedestrian paths can all affect the flag and base. The customer or venue must verify the surface, exposure, safe clearance, landlord or venue rules, right-of-way limits, and applicable sign requirements before use.

Quick answer

Direct answer: Feather banners are curved fabric flags held open by a flexible pole. They work best with one short message, a bold logo, and enough contrast to read while the fabric moves. The customer or venue verifies the surface, clearance, wind exposure, placement rules, and safe use; the quote identifies the flag construction and any pole or base components supplied.

Key takeaways

Confirm whether the quote includes the printed flag, compatible pole, carry components, and a selected base rather than assuming every kit is identical.
Two-sided flags use separate printed panels with a block-out layer; they are heavier than a single fabric panel and need compatible hardware.
Outdoor life varies with UV, wind, salt air, rain, handling, and hours deployed; take flags down when conditions exceed the hardware guidance.

Specs & options

Specs

Material: Polyester flag fabric; weight confirmed for the selected construction
Print Method: Dye-sublimation printing
Scale: Flag and pole height selected from customer-supplied clearance, viewing-distance, and placement requirements
Exposure: Indoor or outdoor use within the limits of the selected flag, pole, and base
Sided: Single panel or two printed panels with a block-out layer
What is supplied: Printed flag plus only the compatible pole, base, ballast, and carry components itemized in the quote

Options

Square plate base — An available low-profile option to review for a customer-verified hard, level surface with suitable clearance.
Ground stake — An available option to review for compatible soil or turf, not concrete, pavement, or areas with unverified underground conditions.
Fillable base — An available portable-ballast option for certain hard-surface uses when listed in the quote.
Cross stand + weight bag — An available folding option to review for compatible level surfaces when the quoted ballast is used.

Need help preparing files? See Artwork Setup.

Production inputs & handoff

Customer-supplied inputs

Final dimensions & specifications

Customer-verified flag size or available clearance, quantity, viewing distance, indoor or outdoor use, viewing direction, and single- or two-sided requirement.
Verified ground or floor type, pedestrian clearance, wind exposure, venue rules, and any height or placement limits used to evaluate a pole and base option.

Artwork & production files

Final wording, vector logo artwork when available, brand colors, and separate correctly oriented faces for two-sided construction.
Artwork must account for the curved flag shape, pole pocket, safe area, and intended read direction shown on the proof.

Handoff requests

Installer handoff

Printed flag supplied alone or with only the compatible pole, base, ballast, and carry components specifically itemized in the quote.
Component grouping or simple part labels can be requested for review; supplied assembly information does not approve the field placement or safe-use plan.

Packaging & fulfillment

State whether flags and quoted components should be grouped or labeled by message, placement, or event; any accepted pack-out must be listed in the production quote.

Not included

Site survey, field measurement, ground or utility inspection, placement approval, permit or venue coordination, assembly at the site, base placement, and installation labor.
The customer, venue, or qualified installer remains responsible for rules, access, clearance, surface and base suitability, ballast, weather monitoring, safe setup, and ongoing use.

Good fit for

Grand openings and special events where a short message needs motion.
Trade shows and expos with approved floor space for a freestanding flag.
Storefront approaches and private walkways where placement is allowed.
Open houses, sales lots, and check-in points that need distance visibility.
Sports events and festivals with a base suited to the venue surface.

How it works

1) Supply verified use details

Share customer-verified surface type, indoor or outdoor exposure, available height and width, pedestrian clearance, quantity, event date, viewing direction, and venue or property rules.
2) Choose construction + quoted components

Review flag size, single- or two-sided construction, and any currently available compatible pole, ground stake, plate, fillable base, or weighted cross stand.
3) Prepare + approve artwork

Supply vector artwork when possible. The proof shows the safe area, pole pocket, orientation, and how the design fits the curved flag shape.
4) Produce + hand off

The flag and only the quoted components are prepared for handoff. The customer, venue, or qualified installer handles field verification, assembly, placement, access, ballast, monitoring, and safe use.

FAQ

Are feather flags double sided?

They can be. A two-sided flag uses separate printed panels with a block-out layer so each face reads in the correct direction. It weighs more than a single-panel flag, so the pole and base need to match that construction.

How long do feather banners last?

Service life depends on UV, wind, salt air, rain, deployment hours, storage, and handling. Bring the flag in during severe weather, keep it clear of walls and landscaping, and follow the hardware guidance rather than relying on a fixed lifespan.

What's included with each feather banner kit?

The exact components should be listed in the quote: printed flag, compatible pole sections, carry pieces, and the selected base or ballast. Confirm replacements and extra bases separately.

Which base should I choose?

Use a ground stake only in suitable soil or turf. A plate, fillable base, or weighted cross stand may fit a hard level surface. Wind exposure, flag size, clearance, trip hazards, and venue rules all matter; no portable base makes a flag safe in every condition.

Can I use these indoors?

Yes. Confirm ceiling height, floor space, fire and venue rules, and the path of people or carts. A clean plate or weighted cross base is generally more appropriate indoors than a ground stake.

How quickly can I get my order?

Timing depends on quantity, component availability, artwork readiness, proof approval, production, and the agreed handoff. Share the requested in-hand or event date with the production quote request; no lead time or rush availability is promised until confirmed in writing.

Do you place or install feather flags?

No. LA Prime Signs produces the flag and supplies only the components listed in the quote. The customer, venue, or qualified installer verifies placement, rules, surface, clearance, ballast, weather limits, assembly, and safe use.